Design and Implementation of a Low-Power Transmitter for Medical Applications

Authors

  • Mohammad Bagher Moafi Madani * Telecommunication Company of Iran (TCI), Tonekabon, Iran.

https://doi.org/10.48314/imes.vi.43

Abstract

Wireless sensor networks (WSNs) have become increasingly important in biomedical applications, where the FCC allocates the MICS bandwidth specifically for medical sensor devices. These networks enable sensor nodes to collect vital signals such as ECG, EEG, EMG, blood pressure, body temperature, and heart rate and transmit the data to a base station for storage, processing, and monitoring. The widespread adoption of Radio Frequency (RF) communications has significantly influenced modern healthcare technologies, encouraging research and investment from academia and industry. RF-based systems provide the advantage of wireless data transfer, which reduces wiring complexity and enhances flexibility in medical devices. For reliable communication, both transmitters and receivers must comply with specific operational parameters to minimize interference and ensure accurate data transmission. This study focuses on the design of a low-power transmitter for medical sensor applications, emphasizing efficient bandwidth usage, minimal energy consumption, and compatibility with sensor nodes. The proposed design aims to improve the performance of wireless medical monitoring systems and facilitate real-time data collection and analysis.

Keywords:

Transmitter design, Medical applications, Low-power, Bandwidth, Sensor node

References

  1. [1] Bradley, P. (2022). An ultra low power, high performance medical implant communication system (MICS) transceiver for implantable devices. IEEE Biomedical Circuits and Systems (BioCAS), 158–161.
  2. [2] Witters, D., Portnoy, S., Casamento, J., Ruggera, P., & Bassen, H. (2022). Medical device EMI: FDA analysis of incident reports, and recent concerns for security systems and wireless medical telemetry. IEEE International Symposium on Electromagnetic Compatibility, 2, 32–34.
  3. [3] Pelletier, F. (2022). Inner space. Medical & Pharmaceutical Technology.
  4. [4] Islam, M. N., & Yuce, M. R. (2022). Review of Medical Implant Communication System (MICS) band and network. ICT Express, 4(2), 188–194.
  5. [5] Mahmood, M. F., Gharghan, S. K., Mohammed, S. L., Al Naji, A., & Chahl, J. (2022). Design of powering wireless medical sensor based on spiral-spider coils. Designs, 5(59). https://doi.org/10.3390/designs5040059
  6. [6] Khan, F., Ghaffar, A., Khan, N., & Cho, S. H. (2022). An overview of signal processing techniques for remote health monitoring using impulse radio UWB transceiver. Sensors, Department of Electrical Engineering, University of Engineering Peshawar.
  7. [7] Mahbub, F., Shamsir, S., Pullano, S. A., & Islam, S. K. (2021). Low power low-data-rate IR-UWB transmitter for paediatric apnoea monitoring system. IET Circuits, Devices & Systems. https://doi.org/10.1049/iet-cds.5334
  8. [8] Savci, H. S., Sula, A., Wang, Z., Dogan, N. S., & Arvas, E. (2021). MICS transceivers: Regulatory standards and applications. In Proceedings of SoutheastCon (pp. xx–xx). IEEE.
  9. [9] Lin. (2021). A low-phase-noise 0.004-ppm/step DCXO with guaranteed monotonicity in the 90-nm CMOS process. IEEE Journal of Solid-State Circuits, 40(12), 2726–2734.
  10. [10] Pandey, J., & Otis, B. P. (2021). A sub-100 µW MICS/ISM band transmitter based on injection-locking and frequency multiplication. IEEE Journal of Solid-State Circuits, 46(5), 1049–1058.
  11. [11] Kinget, P., Melville, R., Long, D., & Gopinathan, V. (2021). An injection-locking scheme for precision quadrature generation. IEEE Journal of Solid-State Circuits, 37(7), 845–851.
  12. [12] M, C., Hu, C., Cheng, J., Xia, L., & Chiang, P. Y. (2021). A near-threshold, 0.16 nJ/b OOK-transmitter with 0.18 J/b noise-cancelling super-regenerative receiver for the medical implant communications service. IEEE Transactions on Biomedical Circuits and Systems, 7(6), 841–850.
  13. [13] Lee, J., & Wang, H. (2020). Study of subharmonically injection-locked PLLs. IEEE Journal of Solid-State Circuits, 44(5), 1539–1553.
  14. [14] Leeson, D. B. (2020). Simple model of a feedback oscillator noise spectrum. Proceedings of the IEEE, 54(2), 329–330.
  15. [15] Cutler, L. S., & Searle, C. L. (2020). Some aspects of the theory and measurement of frequency fluctuations in frequency standards. Proceedings of the IEEE, 54, 136–154.
  16. [16] Ghaffari, A., Klumperink, E. A., Soer, M. C., & Nauta, B. (2020). Tunable high-Q N-path band-pass filters: Modeling and verification. IEEE Journal of Solid-State Circuits, 46(5), 998–1010.
  17. [17] Mirzaei, A., Darabi, H., Leete, J. C., & Chang, Y. (2020). Analysis and optimization of direct-conversion receivers with 25% duty-cycle current-driven passive mixers. IEEE Transactions on Circuits and Systems I: Regular Papers, 57(9), 2353–2366.
  18. [18] Mirzaei, A., Murphy, D., & Darabi, H. (2020). Analysis of direct-conversion IQ transmitters with 25% duty-cycle passive mixers. IEEE Transactions on Circuits and Systems I: Regular Papers, 58(10), 2318–2331.
  19. [19] Leung, B. (2019). VLSI for wireless communication. Englewood Cliffs, NJ: Prentice-Hall.
  20. [20] Kim, H., Ryu, S., Chung, Y., Choi, J., & Kim, B. (2019). A low phase-noise CMOS VCO with harmonic-tuned LC tank. IEEE Transactions on Microwave Theory and Techniques, 54(7), 2917–2924.

Published

2026-04-05

Issue

Articles in Press

Section

Articles

How to Cite

Moafi Madani, M. B. . (2026). Design and Implementation of a Low-Power Transmitter for Medical Applications. Intelligence Modeling in Electromechanical Systems. https://doi.org/10.48314/imes.vi.43